FC-1000R Series LED Ceiling Light
Product Description
FC-1000R series
IP54 LED Ceiling Light
18W - 24W
FC-1000R series LED Ceiling Light is the ideal
choice for Residential and Commercial lighting,
as well as outdoor lighting;
Benefits
* Flexible with 1 light offers 3 types of color
temperature, Simple color temperature selection
via dip switch;
* Enable slim housing design with less than 70mm
height injected plastic housing;
* Very high lumen efficiency more than 90lm/w
Applications
Suitable for most residential and commercial
applications such as bathrooms/toilets, hallways,
corridors, functional utility, etc.
Approval marks
(under preparation if not on label)
Product features
● Input voltage: AC220-240V ~ 50/60Hz ● Color Rendering Index: >80 Ra
● Output power: 18W/24W ● Lumen Efficiency more than 90lm/w
● Single color /3CCT / Microwave sensoring ● 50,000 hours lifetime
/ Dimmable optional ● Ambient temp range: -20 to +50°C
● Power Factor up to 0.95 ● 3 years warranty
Specification:
PART NO | Power | Function | LED Type & Qty | Dimension | Luminous Flux | CRI | IP Rating |
FC-1220R | 18W | Single color 3000K / 4000K / 6000K | Epistar SMD2835 108 pcs | ø250 *64.5 mm | >90lm/w | >80 | IP54 |
FC-1220R-3CCT | 3CCT by DIP-switch | Epistar SMD2835 216pcs | |||||
FC-1220R-D | Dimming | Epistar SMD2835 108 pcs | |||||
FC-1220R-S | Microwave sensoring | Epistar SMD2835 108 pcs | |||||
FC-1280R | 36W | Single color 3000K / 4000K / 6000K | Epistar SMD2835 144 pcs | ø288 *69.5 mm | |||
FC-1280R-3CCT | 3CCT by DIP-switch | Epistar SMD2835 288pcs | |||||
FC-1220R-D | Dimming | Epistar SMD2835 144 pcs | |||||
FC-1280R-S | Microwave sensoring | Epistar SMD2835 144 pcs | |||||
PART NO | Power | Classification | LED Driver | PF | Warranty | Packaging | |
Qty per ctn | CTN Meas. | ||||||
FC-1220R | 18W | CLASS II | Non-Isolated | >0.5 | 3 years | 10 | 52.5*36.3*28cm |
FC-1220R-3CCT | |||||||
FC-1220R-D | |||||||
FC-1220R-S | |||||||
FC-1280R | 24W | 60*38.5*32cm | |||||
FC-1280R-3CCT | |||||||
FC-1220R-D | |||||||
FC-1280R-S | |||||||
Wiring
Terminal: push in terminals
Installation |
1. Turn off the power |
2. Use a screwdriver to withstand the fixed pin, and unscrew the base plate to the direction of anti-clockwise at the same time. |
3. Remove the pressing patches on the base plate |
4. Cross the wire to the terminal and fix the wire tightly. |
5. Connect the wire to the bushing. |
6. Screw the base plate |
7. Align the lamp body with specific positing of base plate and tighten |
8. The ceiling light has been installed |
9. Turn on the power. |